automotive

dicembre 19, 2018 - Seat

An inside look at the CUPRA e-Racer

Comunicato Stampa disponibile solo in lingua originale.

The battery, weighing 450 kg, is the part that determines the design and location of the remaining elements
Four engines, located at the rear, succeed in reaching 12,000 rpm and accelerating from 0 to 100 km/h in 3.2 seconds
The car features an energy recovery system to harness power when braking and decelerating

Looking at what could be described as a multimedia x-ray, a 3D animation takes us on a journey deep inside the #cupra #eracer, the world’s first fully electric competition touring car. With a year to go before it makes its debut, we examine the bones of this car and its main components:- A 450 kg battery, the core element: It accounts for a third of the vehicle’s total weight and is a challenge when developing this model, as explained by the head of engineering at #cupra, Xavier Serra: “The battery determines the entire design and position of the remaining elements”. It is located “as low as possible so that the centre of gravity is closer to the ground and enhances the car’s dynamics”, he points out. This part is made up of 23 panels with a total of 6,072 battery cells, generating the same power as 9,000 mobile phones connected at the same time.

- Four ‘green’ engines’: These are mounted over the rear axle and deliver 680 hp. ”The electric engine is less complicated, more efficient and requires less maintenance”, says Xavier. The #cupra #eracer has a single gear that “gives us wonderful acceleration, from 0 to 100 km/h in 3.2 seconds and a top speed of 270 km/h”, explains this engineer.

- No energy is lost; it is transformed: This car features an energy recovery system that harnesses energy from braking and decelerating. The steering wheel of the #cupra #eracer has a display panel that the driver and engineers can monitor and transfer a full range of vehicle performance data in real time while driving for efficient energy management.

- Temperature control: On the track, the technical team and the driver himself must know how to manage the temperature of the components. This car is equipped with a bespoke cooling system in the radiator, which provides cooling in around 20 minutes. “There are three independent cooling circuits, as each element has different temperature limits: the battery threshold is 60 °C, the inverters 90 °C, and the engines 120 °C”, points out Xavier Serra.

- Final stretch towards a new #racing format: CUPRA engineers and technicians continue to work to get the most out of the car. “This vehicle generates a lot of energy and we’re working on how to use it efficiently and achieve good lap times”, explains Xavier. In this sense, regardless of whether the car is equipped with an electric or a combustion engine, the goal is the same: “to be the fastest and cross the finish line in first place.”Components and strategy go hand in hand, a combination that will peak in 2020 when the #cupra #eracer competes for the first time in the new ETCR #racing format.

- Video (1)

- Fotogallery (16)

An-inside-look-at-the-CUPRA-e-Racer 001 HQ

5000x3333, 8MB

An-inside-look-at-the-CUPRA-e-Racer 002 HQ

5000x3333, 6MB

An-inside-look-at-the-CUPRA-e-Racer 003 HQ

5000x3333, 2MB

An-inside-look-at-the-CUPRA-e-Racer 004 HQ

5000x3333, 3MB

An-inside-look-at-the-CUPRA-e-Racer 005 HQ

5000x3333, 2MB

An-inside-look-at-the-CUPRA-e-Racer 006 HQ

5616x3744, 3MB

An-inside-look-at-the-CUPRA-e-Racer 007 HQ

4746x3159, 7MB

An-inside-look-at-the-CUPRA-e-Racer 008 HQ

4928x3280, 9MB

An-inside-look-at-the-CUPRA-e-Racer 009 HQ

3840x2160, 15MB

An-inside-look-at-the-CUPRA-e-Racer 010 HQ

3840x2160, 14MB

An-inside-look-at-the-CUPRA-e-Racer 011 HQ

3840x2160, 14MB

An-inside-look-at-the-CUPRA-e-Racer 012 HQ

3840x2160, 16MB

An-inside-look-at-the-CUPRA-e-Racer 013 HQ

3840x2160, 15MB

An-inside-look-at-the-CUPRA-e-Racer 014 HQ

3840x2160, 14MB

An-inside-look-at-the-CUPRA-e-Racer 015 HQ

5000x3333, 2MB

An-inside-look-at-the-CUPRA-e-Racer 016 HQ

4000x2667, 3MB

- Documenti (1)

Press release

186KB

News correlate

aprile 18, 2024	aprile 12, 2024	aprile 05, 2024
An interior that boosts your emotions	CUPRA and FC Barcelona’s captain Marc ter Stegen extend their partnership	The Rebel Side of Design: CUPRA porta a Milano la visione del suo sogno
Comunicato Stampa disponibile solo in lingua originale. The interior of the CUPRA DarkRebel showcar is pure provocation, questioni...	Comunicato Stampa disponibile solo in lingua originale.CUPRA has renewed its collaboration with FC Barcelona goalkeeper Marc ter S...	CUPRA, brand automobilistico contemporaneo che ispira il mondo dal cuore di Barcellona, torna a Milano con il progetto “The Rebel ...
Automotive Design Excellence	Automotive Sport	Automotive
#design #supercar #cupra #excellence #automotive #auto #darkrebel	#corporate #sponsor #cupra #partnership #calcio #fcbarcelona #auto	#tecnologia #design #cupra #produzione #automotive #auto
Scarica tutto	Scarica tutto	Scarica tutto
7 2 1	3	6

Ti potrebbe interessare anche

marzo 06, 2024	marzo 06, 2024	febbraio 27, 2024
CUPRA e FC Barcelona siglano un’alleanza globale fino al 2029	CUPRA nomina Ignasi Prieto nuovo Chief Brand Officer	Fabio Di Giannantonio su CUPRA Formentor VZ5 BAT per la stagione MotoGP 2024
CUPRA continuerà ad essere Official Automotive and Mobility Partner e Official Car del FC Barcelona per i prossimi cinque anniL’ac...	Questa nuova posizione sostituirà quella di COO di CUPRA, precedentemente ricoperta da Sven SchuwirthDal 1° aprile, Ignasi Prieto ...	Per il terzo anno consecutivo, CUPRA è partner automotive ufficiale del Pertamina Enduro VR46 Racing TeamUna flotta di CUPRA Forme...
Automotive Sport Corporate	Automotive Corporate	Automotive Racing
#sport #sponsor #cupra #partnership #calcio #fcbarcelona #automotive	#corporate #cupra #people #automotive #nomine #ignasiprieto	#ducati #corporate #racing #design #motogp #motore #cupra #partnership #fabiodigiannantonio #automotive #auto #formentorvz5 #pertaminaendurovr46racingteam
Scarica tutto	Scarica tutto	Scarica tutto
1 1	2 2	8 1