Cookie Consent by Free Privacy Policy website Brembo unveils use of its braking systems at the 2017 Formula 1 Chinese GP
april 09, 2017 - Brembo

Brembo unveils use of its braking systems at the 2017 Formula 1 Chinese GP

Everything you want to know about the braking sections that demand the most from drivers, dissipated energy and time spent braking

From April 7 to 9, the Shanghai International Circuit will host the 2nd race of the 2017 Formula 1 World Championship. The track was designed by architects Hermann Tilke and Peter Wahl on swampland, which is why 40,000 stone pillars were positioned underneath before construction started, creating a stable foundation.

In the 2016 #chinesegp, a good 181 overtakings were registered. Contributing to this feat were two straightaways on the track, one at the finish line measuring over 764 meter and another about 1.202 meter long, which allow drivers to make use of the DRS. The track also has five second-gear corners that can be taken well only if the car has a significant aerodynamic load.

The circuit as a whole is not particularly demanding on the brakes, especially because the cars are usually at maximum aerodynamic load. According to #brembo technicians, who classified the 20 tracks in the World Championship on a scale of 1 to 10, the Shangai International Circuit falls into the category of circuits that present mid-level difficulty for brakes. The Chinese track earned a 6 on the difficulty index, identical to the score given to the Austin circuit.

Each team that uses #brembo products is supplied with a tailor-made braking system, which is tightly integrated with the car design and subject to continuous refinement throughout the season.
This is another reason why the brake calipers were completely redesigned for each of the supplied teams. The idea is to integrate it with the aerodynamic solutions researched by each team, working towards maintaining optimal lightweightness and stiffness, in spite of the larger-sized disc.

The demand on the brakes during the GP

Even though this track is longer than the one in Melbourne by just a few hundred meter, the Shanghai International Circuit requires drivers to turn to the brakes more often, using them for almost 20 seconds per lap. This translates into a lap time that is a good 13 seconds more than the time registered on the Australian track.

With respect to 2016, the average deceleration has increased, going from 3.4 G last year to 3.5 G this year. This value is very high in absolute terms, yet it is lower than what was recorded at a lot of the other World Championship tracks.

From the starting line to the checkered flag, each driver uses his brakes nearly 450 times, applying a total load on the brake pedal of more than 40 tons, which is equivalent to the weight of 470 female adult pandas. Said another way, each driver applies a load of more than 370 kg per minute.

As for energy dissipated in braking, the Shanghai International Circuit places last among the World Championship tracks: over the course of the entire race, a car dissipates in braking about 124 kWh of energy on average, the same amount of electric energy consumed daily by approximately 10 Shanghai residents.

The most demanding braking sections

Of the 8 braking sections at the Shanghai International Circuit, 3 are classified as demanding on the brakes, 2 are of medium difficulty and 3 are light.

The most challenging braking section is curve 14 with its 4.7 G in deceleration: the single-seaters arrive at the curve going more than 330 km\h and they brake to go down to 66 km\h in just over 129 meter. At this point, the drivers apply a load of 125 kg on the brake pedal.

Turn 6 is also exciting: speeds go from 295 km\h to 81 km\h in about 114 meter, while the deceleration reaches 4.6 G. This is the same amount of braking space found at curve 11, but the deceleration there is slightly lower (4.5 G) and the load on the pedal is greater (125 kg instead of 123 kg). 

The first curve is unique in that it comes after the finish line and the cars are going more than 323 km\h because the turn-in stage lasts a long time, extending all the way to turn 2, which is practically attached to the first one. In other words, the pilots never take their foot off the brake pedal, if not for a mere fraction of a second. Which explains the 5.75 seconds spent overall in braking.

Brembo Performance

In #china, the single-seaters equipped with #brembo calipers have won nine of the 13 races contested up to today, including the last five. This is also where Sebastian Vettel won his first race with Red Bull in 2009. He also turned the fastest pole position (1’33’’706) ever recorded on this track, an achievement that may be surpassed this year.

Related news

march 27, 2024
march 25, 2024
march 20, 2024

Daniel Ricciardo, Yuki Tsunoda, Max Verstappen and Sergio Perez went head-to-head in an Aussie surf lifesaver challenge, but it wa...

KICK Sauber F1 Team didn’t just go Down Under – it also went fully sideways, as Valtteri Bottas and Zhou Guanyu joined KICK for a ...

Daniel Ricciardo #3"Alright, Australia race week! I’m home, feels great, it’s warm, it’s sunny, can’t wait, let’s get the season g...

You might be interested in

march 19, 2024
march 12, 2024
march 08, 2024

KICK Sauber F1 Team heads to Australia for the third round of the Formula One World Championship. Against the backdrop of Albert P...

AMNA AL QUBAISIVisa Cash App RB Academy Programme, Operated By MP MotorsportRace 1 – Finish Position: 13, Start Position: 15Race 2...

Yuki Tsunoda #22First Practice Session – Best lap: 1:31.036, pos. 16th, 25 lapsSecond Practice Session – Best lap: 1:29.666, pos. ...